dsh-remote-ssh plugin

A community plugin for the DeepSeek Harness (dsh): remote SSH workspaces.

Not affiliated with, endorsed by, or supported by DeepSeek. "DeepSeek Harness" is a trademark of DeepSeek, used here only to describe what this plugin is built on.

Connect a server once, pick a folder there, and work in it: the agent reads, writes, edits, lists, searches, and runs shell commands on the far side with every tool it already has. The connection is shared by every session, several servers can be connected at once, and the whole thing is switched on from Settings → Plugins.

┌──────────────────────── your machine ────────────────────────┐
│  dsh (web UI, agent, tools)                                  │
│    ctx.fs ─┐                                                 │
│    ctx.shell ├──► remote-ssh router ──► ssh (ControlMaster) ──┼──► server
│    ctx.subprocess ┘        │                                 │
│                            └─ local paths keep the shipped   │
│                               sandboxed providers, verbatim  │
└──────────────────────────────────────────────────────────────┘

The interface is available in English, French, and Chinese, and follows your browser's language. The user guide is published in the same three languages.

Install

curl -fsSL https://raw.githubusercontent.com/cmukanisa/dsh-remote-ssh/main/install.sh | sh

Or from a clone:

git clone https://github.com/cmukanisa/dsh-remote-ssh
cd dsh-remote-ssh
node install.mjs            # checks, installs, verifies, activates

Installing activates the plugin, and the run is a transaction: it checks every requirement first, installs, verifies, and rolls back to the exact previous state if anything does not pass. A half-installed plugin is worse than none — the loader would either fail to boot the profile or boot it with a composition that disables the shipped providers and never registers the replacements.

  checking
  ✓ node        ·························· v24.14.0 (the harness requires >= 22.19)
  ✓ ssh         ···································· OpenSSH_10.3p1, LibreSSL 3.3.6
  ✓ tailscale   ················ 1.102.3 — the Tailscale SSH transport is available
  ✓ harness     ················································· /Users/you/.dsh
  ✓ writable    ··································· profiles/plugins accepts writes
  ✓ modules     ················· profiles/node_modules/@deepseek-ai/cordis present

  installing
  ✓ copied      ········ dsh-remote-ssh → profiles/plugins/dsh-remote-ssh (8 files)
  ✓ copied      ·· dsh-remote-ssh-ui → profiles/plugins/dsh-remote-ssh-ui (4 files)
  ✓ patched     ···································· cordis.patch.yml (8 rows)
  ✓ enabled     ····························· settings.yaml remote-ssh.enabled = true

  verifying
  ✓ files       ······················································ 12 files in place
  ✓ composition ·············································· 8 expected rows
  ✓ setting     ····································· remote-ssh.enabled = true
  ✓ module      ············· registry.js imports and exports RemoteRegistry

  ──────────────────────────────────────────────────────────────────────────────
  Done in 0.1s. Reload the harness page, then workspace "+" → "Serveur distant (SSH)".

Three durable changes, idempotent on every re-run:

1. copies the packages into $DSH_HOME/profiles/plugins/;
2. replaces its own managed block in $DSH_HOME/cordis.patch.yml (the home-level layer, so every profile gets the rows);
3. writes $DSH_HOME/settings.yaml with remote-ssh.enabled: true.

A re-install never flips an existing remote-ssh.enabled on its own: that value is your answer, and --enable is the only thing that overrides it.

Requirements

• dsh installed (npm install -g @deepseek-ai/dsh), any profile.
• Node 22.19+ or 24+ — the same range the harness itself requires.
• An OpenSSH client on the machine running dsh (ssh -V). Windows OpenSSH works as a client, but without connection multiplexing.
• A POSIX SSH server (Linux, macOS, BSD). A Windows OpenSSH server is refused with an explicit message — see Limitations.
• Key-based authentication is recommended. sshpass is required only if you configure a password.
• Optional: ripgrep on the server, for the glob and grep tools.

Documentation

The user guide is published in three languages — English, Français, 中文 — and the page follows your browser's language:

https://cmukanisa.github.io/dsh-remote-ssh/

The same content lives in docs/ in this repository, as plain HTML with no build step. CONTRIBUTING.md covers how to work on the plugin itself.

Activate

It is already active after installing. The switch stays useful for turning it off: Settings → Plugins → “Workspaces distants (SSH)”.

It gates offering remote workspaces (the chooser and the sidebar launcher). It never gates routing: a session already living in a mirror keeps reaching its server, because silently falling back to the empty local mirror would be worse than any error.

Then reload the page.

Use

1. Click + in the sidebar's workspace header (or the 🖥 button in the sidebar foot, which always opens the same dialog).
2. Choose Serveur distant (SSH).
3. ＋ Serveur and fill in the connection: name, host, port, user, private key path, or a password. Your ~/.ssh/config aliases, ProxyJump, and SSH agent all work, because the plugin drives the real ssh binary.
4. Browse to the folder, then Utiliser ce dossier.

The folder appears as a normal workspace. A session opened there reads, writes, edits, lists, searches, and runs commands on the server.

Several servers can be connected at once; each gets its own mirror, and the profile chips switch between them in the same dialog.

Work that outlives the harness

The agent loop runs inside the harness, so closing it ends the turn. What can keep working is the command, and detaching it is the whole trick: the plugin writes a small launcher on the server, starts it under its own session (setsid, or nohup where that is unavailable), and sends its output to a log file there.

• Close the harness whenever you like. The remote process keeps running.
• Come back and see it. Settings → Plugins lists every run with its live state — running, finished with its exit code, or gone — and its latest output.
• Stop it when you want. A running entry has a Stop button; the whole process group is signalled, so children stop with it. Forget finished clears the records.

One durable record per run lives in $DSH_HOME/remotes-sessions.json, shared by every session, so a harness that restarts re-attaches to work it never watched.

# what the panel reads, from the server's point of view
ls ~/.dsh-remote/run/          # one .sh, .pid, .started, .log, .status per run

Updating

Re-run the installer. It rewrites its own composition block and its closing line says which of two things the running harness needs:

• reload the page when only the browser half changed: the bundle is served from bytes that dsh-client-hmr polls, so a new bundle is a new revision;
• restart the harness (dsh web) when the host half (lib/*.js) changed — Node's ESM loader keeps the module it booted with — or when a package was renamed: dsh-client-modules keys its table on the name it read at boot and keeps serving the new bundle under the old id, so every page load fails with loaded without registering. The installer detects both and says so.

node install.mjs       # or the curl one-liner again

Configuration

Settings ($DSH_HOME/settings.yaml)

remote-ssh:
  enabled: true            # the Settings → Plugins switch
  connectTimeoutMs: 20000  # per `ssh` invocation
  strictHostKeyChecking: accept-new   # accept-new | yes | no

accept-new is the default: a new host is trusted on first use, and a changed host key is always refused.

Profiles ($DSH_HOME/remotes.json, mode 0600)

Written by the installer's dialog. It holds the connection details, including a password if you gave one — which is why the file is created 0600.

Mirrors ($DSH_HOME/remotes/<profile>/…)

Real, empty local directories. Delete one and the remote folder is untouched; the mirror is recreated on the next listing or adoption.

Composition rows

See patch/remote-ssh.patch.yml.tpl. They point at absolute paths because a row's relative specifier resolves against the profile directory, and this layer is shared by every profile.

Tailscale

Two different things are called "connecting over Tailscale", and the plugin keeps them apart on purpose.

OpenSSH over the tailnet — nothing to configure. Point a profile at a MagicDNS name (build-a.example-tailnet.ts.net) or a 100.x.y.z address and the real ssh binary connects over WireGuard. Your keys, your ~/.ssh/config, and your known_hosts remain the authority. This is the default and it is unchanged.

tailscale ssh — opt-in per profile. Choose Tailscale SSH in the connect form. The Tailscale client then wraps the system ssh, which buys three things:

• MagicDNS resolution even with --accept-dns=false;
• reachability through tailscaled, so it works in userspace-networking mode;
• the destination's host key verified against the one the coordination server advertises for that node, on top of your normal host-key policy.

Access is then governed by tailnet ACLs and identity rather than by SSH keys on disk. The adapter never switches transports on its own: a MagicDNS-looking host is reported as a tailnet destination (🌐 on the profile chip) but connects through plain OpenSSH unless the profile says tailscale (⚡).

The connect form also lists your tailnet's peers, read from tailscale status --json: click one to fill in the MagicDNS name, the tailnet user, and — when the peer advertises SSH host keys and therefore runs the Tailscale SSH server — the Tailscale SSH transport. A peer Tailscale reports as offline is named before the attempt, instead of surfacing twenty seconds later as a connect timeout.

# what the plugin reads, if you want to see it yourself
tailscale status --json | jq '.Peer[] | {HostName, DNSName, Online, sshHostKeys}'

Requirements: the tailscale CLI on the machine running dsh (override with DSH_TAILSCALE_BIN). A machine without Tailscale reports the tailnet as unavailable and everything else keeps working.

How a path is routed

Containment follows the local sandbox: read-only refuses every remote mutation, and workspace-write refuses any remote target whose canonical mirror path is not under the per-call workspace root. The check is canonicalize-then-contain over the remote realpath, so it keeps the same guarantee the local fence does.

Why it is built this way

A workspace in dsh is a real local directory: session headers carry a canonical local cwd, the workspace registry realpaths the path at creation, and the sidebar resolves sessions by that canonical path. Rather than teach all of that a second path vocabulary, a remote folder gets a local mirror — a real but empty directory at $DSH_HOME/remotes/<profile>/<remote/path> — and the filesystem provider translates every path under it into the remote path it mirrors.

Everything above the filesystem therefore keeps working unchanged, including the parts that bypass ctx.fs.

The plugin replaces three capability providers, each with a subclass that keeps the shipped behaviour verbatim for local paths:

Limitations

• POSIX servers only. The far side is driven with POSIX shell source (sh -c, stat, realpath, mv, head/tail). A Windows OpenSSH server is refused with a message that says so, rather than half-working.
• Remote commands are not confined. ctx.shell confinement (bwrap, Seatbelt) is a same-kernel facility; over SSH the account's own permissions are the boundary. No sandbox facts are reported for a remote run, because none were applied. The filesystem fence described above is enforced.
• glob and grep need ripgrep on the server. When it is missing, the tool fails with an actionable message instead of returning wrong results.
• No file watching. The sidebar's file tree refreshes on navigation, not on remote changes.
• Mirror directories can shadow a same-named local path. A path under $DSH_HOME/remotes/ always belongs to its profile.
• process.cwd()-relative tooling inside the agent's shell works, but tools that hard-code local filesystem access outside ctx.fs (for example a hook that reads a file) see the empty mirror.

Troubleshooting

Testing

npm run deps          # symlink the harness packages (once)
npm run check         # parser + bundle-wrapper check
npm run test:unit     # no SSH needed
npm run test:harness  # against a running harness

npm run ssh:up        # docker OpenSSH target on 127.0.0.1:2223
npm run test:e2e      # filesystem, shell, and subprocess over real SSH
npm run ssh:down

The CI matrix runs the unit suites on Linux, macOS, and Windows across the supported Node range (22.19+ and 24+; the harness does not support Node 20); the end-to-end suites against an Alpine server, a Debian server, a macOS server, and a Windows server (whose refusal is asserted); and a full harness boot where the browser bundle and the Remote namespace are exercised. See CONTRIBUTING.md.

Guide rapide (français)

Installer — curl -fsSL .../install.sh | sh, ou node install.mjs.

Activer — Paramètres → Plugins → « Workspaces distants (SSH) » → cliquer « Désactivé ». Puis rechargez la page.

Utiliser — bouton + de la barre latérale → « Serveur distant (SSH) » → ＋ Serveur (hôte, port, utilisateur, clé privée ou mot de passe) → parcourir → Utiliser ce dossier. Le dossier devient un workspace normal : lecture, écriture, édition, recherche et commandes shell s'exécutent sur le serveur.

Plusieurs serveurs peuvent être connectés en même temps et restent disponibles pour toutes les sessions.

Author

Built by Christian Kasse (@cmukanisa) — see the contributors for everyone who has helped. Contributions are welcome; start with CONTRIBUTING.md.

License

MIT.